NRGkick Adaptor for CEE17 16A three-phase - 11kW

The CEE17 16A 3-phase power socket adaptor for NRGkick charger

Equip your NRGkick charger with an adaptor compatible with the CEE17 16 amp three-phase power sockets.

This adaptor is designed specifically for NRGkick brand chargers, manufactured by DiniTech. Connect the NRGkick adaptor to the NRGKick charger unit which has an LED to display the connection status. Thanks to the integrated LED, stay informed about the charging status or possible problems during the charging process.

A smart adaptor for charging an electric car on a reinforced socket

NRGkick has designed a range of smart adaptors to recharge your electric or plug-in hybrid vehicle in the best conditions and in complete safety.

The NRGkick home socket adaptor has unique intelligent systems on the market:

• A higher protection rating than other electric car chargers with P67 and IP69K protection ratings. The adaptor is protected against the ingress of dust and water, even during high-pressure cleaning with hot water.
• Even if the NRGkick is wet, use via the touch surface still works perfectly (in winter even with gloves, to protect fingers that are very sensitive to the cold...).
  
• Hot-plug protection: Integrated into the NRGkick connector, this protection system detects a disconnection of the connector in good time, cuts off the power supply and prevents the formation of electric arcs when the NRGkick is removed. A special mechanism interrupts the power supply before the pins of the smart accessory have even left the socket. This guarantees absolute safety when connecting and disconnecting from the mains.
• Continuous temperature monitoring : If a high temperature is detected at the wall outlet, the NRGkick's temperature management ensures that the charging current is reduced or even completely interrupted before temperatures become critical and something can happen.
• Phase detection and reverse polarity protection : The new connector system ensures that the NRGkick will not be damaged even if the electrical system is installed incorrectly. The connector unit detects, for example, whether the phases and neutral are reversed and protects the NRGkick electronics from possible overvoltages.
• The NRGkick charger is equipped with an LED circuit that displays the connection status of the P17 reinforced socket adaptor.

Technical specifications of the NRGKick Three-phase CEE17 16A socket adaptor – 11kW

NOTE
This adaptor is only compatible with DiniTech NRGkick products.