Lumeneo SMERA charging cable

Lumeneo SMERA charging cable

Charge using a Lumeneo SMERA charging cable for Type 2 or Type 3C public charging stations or a Lumeneo SMERA charger equipped with a car-side Domestic plug connector. Select your electric cable with sufficient length to reach from the side of the car to the charging stations or power outlet. You can now use your Lumeneo SMERA cable in all possible configurations for hassle-free charging.
The figures quoted in the information on charging below are estimations.
Charging your Lumeneo SMERALumeneo SMERA charging cableLumeneo SMERA charging station
Please enter your vehicle version to see which products are compatible.

1 product for Lumeneo SMERA charging cable 10 kWh - 2 kW - monophase

Notre expert recommande ce produit pour la Lumeneo SMERA lorsque vous disposez d'une installation électrique Single-phase. En savoir plus
connecteur type 2 prise domestique
adaptateur prise pour borne T2

Type 2 connector – Domestic power outlet for charging station

Metron
  • Power 3.7 KW
  • Refill 31 km/h
  • Recharge time 2h52
199,00 €

Frequently asked questions

Generally speaking, the charging cable of your Lumeneo SMERA EV plugs in at the front, at the rear, or on the side of the vehicle via the charging port.

Charging your Lumeneo SMERA with a cable for a household socket takes a long time because using a standard socket limits the current to 10 A (i.e. a little over 2 kW).
When charging at a public station with your Lumeneo SMERA, the charging time varies depending on the power rating of the installation.

The recommended products correspond to the wallbox with the ideal configuration to charge your Lumeneo SMERA version. To simplify the selection among the different compatible charging stations, we have highlighted the perfect match between the electrical installation, the vehicle and the wallbox that will allow you to charge in the best conditions.